High Force Shakers Vibration Test Systems, Total Solution Provider
Applicable Standards: MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc.
Key Applications:
- Automotive parts and systems - qualification testing
- Electronic assembly, computer equipment testing
- Avionics and military hardware testing
- Satellite component testing
- Product and package testing
- General stress screening
Specifications: EV232-EV330
| Model | EV240 | EV250 | EV260 | EV320 | EV330 |
| Vibration Generator | VG4000/50 | VG5000/50 | VG6000/50 | VG2000/76 | VG3000/76 |
| Frequency(Hz) | 2-2500 | 2-2500 | 2-2500 | 2-3000 | 2-2500 |
| Max Exiting Force(kg.f) | 4000 | 5000 | 6000 | 2000 | 3000 |
| Max. Displacement (mmp-p) | 50 | 50 | 50 | 76 | 76 |
| Max. Acceleration(g) | 100 | 100 | 100 | 80 | 80 |
| Max. Velocity(cm/s) | 200 | 200 | 200 | 200 | 200 |
| Payload(kg) | 800 | 1000 | 1000 | 1000 | 1000 |
| Armature Mass(kg) | 40 | 50 | 50 | 25 | 35 |
| Armature Diameter(mm) | φ400 | φ450 | φ450 | φ320 | φ320 |
| Cooling Method | Forced Air Cooling |
| Vibration Generator Weight(kg) | 2500 | 3500 | 3800 | 2000 | 3000 |
| Vibration Generator Dimension L*W*H(MM) | 1400*980*1100 | 1600*1120*1340 | 1600*1120*1340 | 850*1000*1100 | 1100*1300*1440 |
| Power Amplifier | Amp50k | Amp60k | Amp70k | Amp30k | Amp45k |
| Cooling Method | Forced Air Cooling |
| Power Amplifier Weight(kg) | 600 | 800 | 1000 | 550 | 600 |
| Power Amplifier Dimension L*W*H(MM) | 800*550*1920 | 800*550*1920 | 800*550*1920 | 800*550*1920 | 800*550*1920 |
Utility Requirements | 3-phase AC380V ±10% 50Hz |
| Aggregate Capacity(KW) | 64 | 85 | 95 | 40 | 60 |
Features
- Armatures diameters from 320 mm (12.6 in) to 450 mm (17.7 in) with metric or American pcd.
- Internal load support is standard
- Active armature suspension system
- Standard body isolation and guidance system designed to eliminate the use of a seismic base
- Useful vibration control frequency range from 2 to 3000 Hz
- Some systems available with 76 mm (3 in) displacement
Presales:
- Technical consultation: test method, laboratory planning and suggestion.
- Equipment selection: selection scheme, FAQ.
- Product testing scheme.
In-Sales:
- Customer communication and progress report.
- Guidance for pre-installation preparation, equipment commissioning and test run.
- Calibration (when Third Party’s verification is required).
After-Sales:
- Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
- Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
- Technical support: special paid services are provided according to customer’s needs.
Working Principle:


Detailed Pictures:
