Labtone Test Equipment Co., Ltd
Vibration and Shock Test Equipment for over 20 years
Add to Cart
50kg Payload Simple Mechanical Vibration Test Machine for Laboratory and Production Line
Product Introduction
There are two main test functions for LABTONE Mechanical Vibration Test System : fixed frequency test and frequency sweep test. These two testing functions provide users to test their products with: vibration function test, durability test, packing and shipping test, resonance search, resonance reside, stress screening, fatigue test...And so on.
The Fixed Frequency Test Mode : set a test frequency point and test time, the vibration test machine is tested according to the set conditions until the end of the test time, the operation mode is as (Figure a).
The Frequency Sweep Test: set the starting frequency, termination frequency and sweep time, vibration test machine is tested according to the starting frequency gradually increase or decrease the vibration frequency to the termination frequency, and sweep speed determined by the sweep time, the operation mode is as (Figure b).
Economy mechanical vibration test machine Application
This series of vibration testers is applicable for vibration and engineering testing vertically in laboratory as well as production line. The structure of the vibration tester is reasonable with good reliability, simple operation and is cost effective.
Mechanical vibration test machine specifications
| Model | VB60S |
| Frequency(Hz) | 15~60 |
| Displacement (mmp-p) | 2.5 |
| Acceleration range | 14g |
| Max. payload(kg) | 50kg |
| Table size(L×W) | 600×500mm |
| Test pattern | fixed frequency ,sweep frequency |
| Power supply | AC 220V |
| Machine dimension | 560*610*315mm |
| machine weight | 120kg |
Customer Services
Presales:
In-Sales:
After-Sales:
- The damping spring of the machine should be regularly (about six months) inspected, make sure
no other debris in the spring.
- Users should regularly (about a year) check the machine screws, whether there is loosening
phenomenon.
- Users should regularly check (about a year) whether the power connector is loose.
Detailed Picture:
