150kg Payload Packaging Drop Test Equipment for Big Size and Heavy Package with ISTA
Drop Test Equipment for Heavy Package
Basic test of package specifications including a cushioned package design, selection in packaging materials, fragility of packaged contents, standard test of packaged freights (surfaces only), etc. can be performed efficiently with a high accuracy.
Auto Parts Packing Carton Packaging Drop Test Equipment With ISTA Standard Specification
| Model | DT015 | DT020 | DT030 |
| Drop height(mm) | 0----1200 | 0----1200 | 0---1200 |
| Specimen weight(KG) | 150 | 200 | 300 |
| Specimen dimension(mm) | 1000*1000*1000 | 1200*1200*1200 | 1200*1200*1200 |
| Drop type | Free drop |
| Machine dimension(mm) | 1900*1700*2800 | 2100*1700*2800 | 2100*1700*2800 |
| Machine Weight(kg) | 2500 | 3200 | 4500 |
| Power supply | 3 phase AC380V 50HZ |
| Standards | ISO2248-72(E) GB/T4857.5 JISZ0202-87 IEC68-2-27 |
Functions and Features
- Free drop in precise posture
The table which carried a specimen carries out fall operation holding the product, and free-drop for a specimen in precise posture. - Controll drop height
The drop height of packaged cargo is performed by digital set-up of a control device, and risen to specification height by motor-brock, and is separated by drop switch after holding a position in air brake. - Anti-rebound of drop table
When the specimen table is dropping to base, the shock absorber and the air brake will stop the table rebound as the table will be stored in the groove of base and be kept from bounding on the base upper surface. - Taiking care for safty use
The drop operation cannot be activated when the the specimen table does not set to drop height position.
In order to prevent unprepared drop operation, drop test is operated by two push-button switches.
As accessories, equip the base with Photoelectronic Sensor, it will stop drop test when it detects worker's leg and something on the base.
Customer Services
Presales:
- Technical consultation: test method, laboratory planning and suggestion.
- Equipment selection: selection scheme, FAQ.
- Product testing scheme.
In-Sales:
- Customer communication and progress report.
- Guidance for pre-installation preparation, equipment commissioning and test run.
- Calibration (when Third Party’s verification is required).
After-Sales:
- Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
- Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
- Technical support: special paid services are provided according to customer’s needs.
Detail Pictures
