Sine Random Electrodynamic Vibration Shaker For Battery Pack Reliability Test with 3 inch Stroke
Introduction:
Labtone supplies vibration test systems to reproduce real-world environmental conditions for industrial manufacturers(electronics, automotive parts, Energy, etc...) and offers technology capable of reproducing a wide-variety of test requirements - vibration (sine, random, shock, SoR, RoR, RSTD and others), data recording and dynamic signal analysis.
Technical Specifications:
| Model | EV320 | EV330 |
| Vibration Generator | VG2200/76 | VG3200/76 |
| Frequency(Hz) | 1-3000 | 1-2700 |
| Max Exiting Force(kg.f) | 2200 | 3200 |
| Max. Displacement (mmp-p) | 76.2 | 76.2 |
| Max. Acceleration(g) | 80 | 85 |
| Max. Velocity(cm/s) | 200 | 200 |
| Payload(kg) | 300 | 400 |
| Armature Mass(kg) | 25 | 35 |
| Armature Diameter(mm) | φ320 | φ320 |
| Cooling Method | Forced Air Cooling |
Utility Requirements | 3-phase AC380V ±10% 50Hz |
| Aggregate Capacity(KW) | 40 | 56 |
Meet International Standards:
MIL-STD-810G, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc.
Main Applications: - Automotive parts and systems - qualification testing
- Electronic assembly, computer equipment testing
- Avionics and military hardware testing
- Satellite component testing
- Product and package testing
- General stress screening
Horizontal oil film slip table
The horizontal slip table is designed to have high tilting moment and lateral restriction. This design concept is combined with standard horizontal slip table to enable high dynamic moment limit and keep guide oil film damping feature. The horizontal slip table is composed of a slipper, a connector, a natural granite slab, horizontal slip table base and an independent oil source.

Presales:
- Technical consultation: test method, laboratory planning and suggestion.
- Equipment selection: selection scheme, FAQ.
- Product testing scheme.
In-Sales:
- Customer communication and progress report.
- Guidance for pre-installation preparation, equipment commissioning and test run.
- Calibration (when Third Party’s verification is required).
After-Sales:
- Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
- Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
- Technical support: special paid services are provided according to customer’s needs.
