Labtone Test Equipment Co., Ltd
Vibration and Shock Test Equipment for over 20 years
Add to Cart
Small Shaker Vibration Tester For PCB Board And Other Electric Products
Introduction to Small Vibration Tester:
With light weight, small volume, convenient to move, ET series standard vibration table is widely used in the acceleration sensor calibration; vibration test, fatigue test and mechanical impedance test of micro parts; at the same time, the ET series can also be used for teaching and scientific research and laboratory.
Vibration test is a process of exciting or shocking some part or device to observe its reaction in real environment. Vibration test is widely applied in many fields, ranging from circuit board, airplane, ship, rocket, missile, automobile, household appliance and other industrial products.
Labtone can offer you the whole vibration and testing proposal, and provide you with the quality certificates of products according to national and international standards, including GB, GJB, UL, JIS, DIN, ISO, BS, MIL, IEC and ASTM standards.
Features:
Specifications:
| Shaker Specifications VG100-25 | |
| Peak Sine (Pk) | 100Kg.f peak (1KN) |
| Random (RMS) | 100Kg.f r.ms (1KN) @ISO5344 |
| Shock (Pk) | 200Kg.f peak (2KN) @6ms |
| Usable Frequency | 1～6000Hz |
| Maximum Displacement (p-p) | 25mm (1inch) |
| Max. velocity | 1.5m/s |
| Max. acceleration | Sine:65G (637 m/s2) ；Random:60g(588m/s2) |
| Vertical Load Support | 100 kg |
| Armature Diameter | Ф120 mm |
| Armature Weight | 1.5 kg |
| Allowable partial force | 220.N.M |
| Fundamental Resonance Frequency (Bare table) | 4700Hz (nom.) +/- 5% |
| Load Attachment Points (Standard) | Stainless Steel Inserts of M6 . (7PCS) |
| Shaker dimensions | 400L x 360D x 470H mm |
| Weight of Shaker | About 175Kg |
| Power Amplifier Specifications PA102EF | |
| Rated Output Capacity | 1KVA |
| Signal to Noise Ratio | Greater than 70 dB |
| Amplifier Efficiency | Greater than 90% |
| Weight of Amplifier | About 39x2 Kg |
| Field power supply | 1KVA |
| Amplifier Overall Dimensions | 440mm(W)x125mm(H)x580mm(L) 2pcs (amplifier is divided into two parts) |
| Interlock Protection | ●Input Over/Under Voltage ●Logic Fault ●Output Over Voltage/Current ●Control Power ●External ●Shaker Oil Pressure ●Module O/T ●Shaker Temp ●Shaker Travel |
Our Services:
| Pre-sales service |
| Technical Advisory: Testing method, laboratory planning and advice |
| Equipment Selection: Type-selecting scheme,FAQ |
| Product testing scheme |
| Selling service |
| Customer Communication,progress communication |
| Before installation, we will provide guidance of preparation , equipment debugging, equipment commissioning |
| Cooperate with measuring if need the third party verification |
| After-sale service |
| Quality assurance period for one year,lifelong maintenance. |
| Technical guidance |
| Feedback within 2 hours after get the call. |
| Accept OEM,Design service,Buyer lable |
Reference picture:
